Is the fingerprint lock fully automatic or semi-automatic?
Fingerprint locks mainly include semi-automatic fingerprint locks and full-automatic fingerprint locks. So, is it a full-automatic fingerprint lock or a semi-automatic fingerprint lock?
The semi-automatic fingerprint lock has a horizontal handle, which may not look so fashionable on the surface, and it will also have a less sense of technology, which makes people feel relatively low-end. The automatic fingerprint lock has a stylish appearance, better flow lines, and easy opening of the door. Therefore, most young people nowadays will consider choosing a fully automatic fingerprint lock.
Some anti-theft doors are equipped with fully automatic fingerprint locks, which may shorten the service life of the locks, and may also cause the phenomenon that they cannot be opened or closed. Therefore, you still have to choose the type of smart lock according to the quality of your own anti-theft door.
1. Semi-automatic fingerprint lock.
Semi-automatic fingerprint locks have the lowest door requirements in the entire smart lock industry. 99% of anti-theft doors can be installed with semi-automatic fingerprint locks. As long as the quality of the lock is correct, the semi-automatic fingerprint lock can basically open the lock. The better the quality of the door, the better the opening effect of the lock, and the opening of the lock will be smoother without resistance. The semi-automatic fingerprint lock is to open the lock by manually pressing the handle down after entering the correct door opening information. Even if the bolt is stuck in the door frame hole, the human force pressing down on the handle is enough to retract the bolt to open the lock without jamming. The phenomenon of unable to open the door.
For semi-automatic fingerprint locks, as long as the lock is of good quality, the door cannot be opened, and even if the lock tongue is jammed, it will not be locked out of the door.
2. Fully automatic fingerprint lock.
If you consider installing a fully automatic fingerprint lock, the anti-theft door or wooden door at home should be of good quality, and there should be no deformation, sinking, or heavy opening and closing. Otherwise, the service life of the lock will be greatly shortened, and the door may not be opened. problem.
The automatic fingerprint lock relies on the power of the motor to drive the lock cylinder, and the lock cylinder drives the lock body to open the door. Once the lock body is hung on the heaven and earth poles and the side lock points, the power of the motor drive needs to be greater, thus shortening the service life of the motor. When using a fully automatic fingerprint lock, try not to install a pole or side lock point.
Most of the functions of fully automatic smart locks are face recognition. Most of the semi-automatic fingerprint locks have no face recognition function, while the fully automatic ones have face recognition, vein recognition, palmprint recognition, etc., and there are mobile APP remote monitoring. Open locks and other functions.
In general, if you buy a fully automatic face recognition lock, you must choose a product with 3D recognition, otherwise the lock can be easily opened by photos or pictures. And when buying a fingerprint lock, you should put your fingerprint on this lock to see how the recognition rate is. If the fingerprint recognition rate is very low, it is not recommended to choose it.
Choosing a smart lock must not be cheap. It will not only have the problem of cutting corners, but even if it is made of plastic and inferior aluminum materials, it has a short service life and a bad feel. When changing smart locks, the lock body must be replaced. The lock body should be 304 steel, which can prevent the lock from being rusted and unable to open and close the door during later use, especially the automatic fingerprint lock.
The semi-automatic fingerprint lock has a horizontal handle, which may not look so fashionable on the surface, and it will also have a less sense of technology, which makes people feel relatively low-end. The automatic fingerprint lock has a stylish appearance, better flow lines, and easy opening of the door. Therefore, most young people nowadays will consider choosing a fully automatic fingerprint lock.
Some anti-theft doors are equipped with fully automatic fingerprint locks, which may shorten the service life of the locks, and may also cause the phenomenon that they cannot be opened or closed. Therefore, you still have to choose the type of smart lock according to the quality of your own anti-theft door.
1. Semi-automatic fingerprint lock.
Semi-automatic fingerprint locks have the lowest door requirements in the entire smart lock industry. 99% of anti-theft doors can be installed with semi-automatic fingerprint locks. As long as the quality of the lock is correct, the semi-automatic fingerprint lock can basically open the lock. The better the quality of the door, the better the opening effect of the lock, and the opening of the lock will be smoother without resistance. The semi-automatic fingerprint lock is to open the lock by manually pressing the handle down after entering the correct door opening information. Even if the bolt is stuck in the door frame hole, the human force pressing down on the handle is enough to retract the bolt to open the lock without jamming. The phenomenon of unable to open the door.
For semi-automatic fingerprint locks, as long as the lock is of good quality, the door cannot be opened, and even if the lock tongue is jammed, it will not be locked out of the door.
2. Fully automatic fingerprint lock.
If you consider installing a fully automatic fingerprint lock, the anti-theft door or wooden door at home should be of good quality, and there should be no deformation, sinking, or heavy opening and closing. Otherwise, the service life of the lock will be greatly shortened, and the door may not be opened. problem.
The automatic fingerprint lock relies on the power of the motor to drive the lock cylinder, and the lock cylinder drives the lock body to open the door. Once the lock body is hung on the heaven and earth poles and the side lock points, the power of the motor drive needs to be greater, thus shortening the service life of the motor. When using a fully automatic fingerprint lock, try not to install a pole or side lock point.
Most of the functions of fully automatic smart locks are face recognition. Most of the semi-automatic fingerprint locks have no face recognition function, while the fully automatic ones have face recognition, vein recognition, palmprint recognition, etc., and there are mobile APP remote monitoring. Open locks and other functions.
In general, if you buy a fully automatic face recognition lock, you must choose a product with 3D recognition, otherwise the lock can be easily opened by photos or pictures. And when buying a fingerprint lock, you should put your fingerprint on this lock to see how the recognition rate is. If the fingerprint recognition rate is very low, it is not recommended to choose it.
Choosing a smart lock must not be cheap. It will not only have the problem of cutting corners, but even if it is made of plastic and inferior aluminum materials, it has a short service life and a bad feel. When changing smart locks, the lock body must be replaced. The lock body should be 304 steel, which can prevent the lock from being rusted and unable to open and close the door during later use, especially the automatic fingerprint lock.